Select a Link

About the Book 

Preview the book

Contents of the book
Chapters 1 to 6
Chapters 7 to 12
Chapters 13 to 18 

E-Resources
Projections of Solids
Sections of Solids
Development of Surfaces
Isometric Projections

Engineering curves
Orthographic projections; Missing views
Perspective projections
AutoCAD tutorials

Syllabus of Indian Universities
Jawaharlal Nehru Technological University, Hyderabad, A.P. (website) Estt. 1972/1995
Jawaharlal Nehru Technological University, Anantapur, A.P. (website) Estt. 1946/1972
Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal, M.P. (website) Estt. 1998
Anna University, Chennai, Tamilnadu (website) Estt. 1978/2001/2012
Gujarat Technological University, Ahmedabad, Gujarat (website) Estt. 2005
I. K. Gujral Punjab Technical University, Jalandhar, Punjab (website) Estt. 1997
Visvesvaraya Technological University, Belgaum, Karnataka (website) Estt. 1998
1st Sem Maulana Abul Kalam Azad University of Technology, Kolkata, W.B. (website) Estt. 2000
2nd Sem Maulana Abul Kalam Azad University of Technology, Koikata, W.B. (website) Estt. 2000
Dr. A.P.J. Abdul Kalam Technical University, Lucknow, U.P. (website) Estt. 2000
Dr. Babasaheb Ambedkar Technological University, Lonere, Maharashtra (website) Estt. 1989
Mahamaya Technical University, Noida, U.P. (website) Estt. 2010
Biju Patnaik University of Technology, Rourkela, Orrisa (website) Estt. 2002
Rajasthan Technical University, Kota, Rajasthan (website) Estt. 2005
Chhattisgarh Swami Vivekanand Technical University, Bhilai, Chattisgarh (website) Estt. 2005
Uttarakhand Technical University, Dehradun, Uttarakhand (website) Estt. 2008
Delhi Technological University, Delhi (website) Estt. 2009
Indira Gandhi Delhi Technological University for Women, Delhi (website) 2013
Himachal Pradesh Technical University, Hamirpur, H.P. (website) Estt. 2010
University of Pune, Maharashtra (website)
APJ Abdul Kalam Technological University, Kerala (website) 2014

IIT Patna (website)
IIT Guwahati
SBTE, Patna (website) Diploma
CBSE class XI & XII

RGPV BT1005 Engineering Graphics Dec 2017 Question Paper

B.E. (All Branches) First Year First Semester Examination, December 2017

Choice Based Grading System (CBGS) 

Engineering Graphics
Time: Three Hours      Maximum. Marks : 70

Note: 

1. Attempt any five questions.
2. All questions carry equal marks.
3. In case of any doubt or dispute the English version question should be treated as final.

1. a) The distance between Hyderabad and Mumbai is 1200 km. A train covers this distance in 20 hours. R.F. of the scale is 1/400,000. Draw a plain scale to measure time up to a single minute. Show the distance covered by the train in 26 minutes. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

1. b) A fountain jet discharges water from ground level at an inclination of 50° to the ground. The jet travels a horizontal distance of 9 m from the point of discharge and falls on the ground. Trace the path of the jet. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

2. a) Write the conceptual difference between the first angle and third angle projection. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

2. b) A straight line AB, 55 mm long makes an angle of 30° to the H.P. and the 45° to the V.P. The end A is 12 mm in front of V.P. and 15 mm above H.P. Draw the projection of the line AB. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

3. a) A regular Pentagon of side 25 mm, has one of its side in the H.P. The plane is perpendicular to the H.P. and inclined at 45° to the V.P. Draw the projections of the pentagon. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

3. b) A right circular cone of 35 mm diameter of base and axis 50 mm long is resting on a one of its generators on horizontal plane with its axis parallel to the V.P. Draw its projections. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH 

4. A pentagonal prism, side of base 25 mm and axis 60 mm long, rests with one of the edges of its base on HP. Its axis is inclined at 30° to HP and parallel to VP. It is cut by a horizontal section plane passing through the highest corner of the base. Draw the sectional top view. 14 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

5. a) A hexagonal pyramid of 20 mm side and 50 mm height is resting on a horizontal plane on its base. Draw the isometric projection of the pyramid. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

5.b ) Discuss the various editing commands in AutoCAD. 7 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

6. A cylinder having 40 mm diameter of base and 60 mm long axis is resting on its base on the H.P. It is cut by a section plane perpendicular to the V.P. and inclined at 45° to the H.P. The section plane is passing through the top end of the extreme generator. Draw the development of the lateral surface of the truncated cylinder. 14 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

7. A room 4 m x 4.5 m x 6 m is fitted with an electric lamp at the centre of the room, l m below the ceiling. The switch is at one comer, 2.5 meters above the floor level. Draw the top view and front view of the room and determine graphically the distance between the switch and Light. 14 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

8. Write short notes on: 14 Marks
    a)    Hypocycloid
    b)    Involutes
    c)    Array command in AutoCAD

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

RGPV ME111 Engineering Graphics Jan 2017 Question Paper

B.E. (All Branches) First Year First Semester Examination, December 2016

Choice Based Credit System (CBCS) 

Engineering Graphics
Time: Three Hours      Maximum. Marks : 60

Note: 

1. Attempt any five questions.
2. All questions carry equal marks.

1. a) Draw the projections of the following points on the same reference line keeping their projectors 20 mm apart.

• i) Point A is 20 mm above HP and 40 mm in front of V.P.
• ii) Point B is 25 mm below HP and 30 mm in front of V.P.
• iii) Point C is in HP and 25 mm behind V.P. 6 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

1. b) A line AB 80 mm long is parallel to and 35mm above HP. Its ends are 30 mm and 50 mm in front of the V.P. Draw its projections and determine its inclination with V.P. 6 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

2. A rectangular plate ABCD measuring 50 mm × 30 mm has its diagonal AC inclined at 30° to the HP and the diagonal BD is inclined 45° to the VP. Draw its projections. 12 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

3. A square pyramid having edge of base 25 mm and axis 60 mm long rests on one of its slant faces on the HP and the edge of the base containing the slant edge is inclined at 45° to the VP. Draw its projections when vertex is drawn towards V.P. 12 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

4. A cone with bnse dinrneter40mm and axis 70mm long is lyingon one of its generators on the HP with its axis parallel to the VP. lt is cut by a section plane parallel to VP and 10 mm away from the axis. Draw its sectional front view and top view. 12 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

5. Develop the lateral surface of a right regular hexagonal prism having side of base 25 mm and axis 60 mm long when it is resting on its base on the H.P. with one rectangular face parallel to the VP and cut by a sectional plane perpendicular to the VP and inclined at 45° to the H.P. The section plane also passes through the right corner of the top face of the prism. 12 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

6. A spherical ball of 50 mm diameter is resting centrally on top of the square prism of 70 mm base side and 25 mm thickness. Draw the isometric projections of the arrangement. 12 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

7. a) Name various methods of locating a point in CAD and explain any one of them. 6 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

7. b) Write the steps for drawing a cylinder of 25 mm base and 50 mm height. 6 Marks
Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

8. a) Write short notes on Edit commands used in CAD software. 6 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.

8. b) Write short notes on advantages of CAD as compared to conventional drawing. 6 Marks

Refer Engineering Drawing second edition - Basant Agrawal, CM Agrawal - TMH.